This RO Membrane Housing is made from high–quality polypropylene for the ultimate in chemical resistance. It will accommodate most standard 3" x 12” (nominal) membranes. Both the ribbed cap and the housing are one-piece injection molded parts. The ribbed cap incorporates 3/8" acme square threads and an O-ring to ensure a leakproof seal.  Don't restrict flow through your housing with the small 1/4" ports offered on other housings!

Recommended Fittings:  Three 3/8" male elbows and a 3/8" check valve to be installed on the permeate tube. 
Use with our 3012 RO membrane that yields 500 GPD.

Benefits:

Test Burst Pressure: 400 psi
Single O-ring Design
Standard FNPT Molded Threads
One Piece Injection Molded Cap and Housing
Cycle Test: 150,000 Cycles at 150 psi

Specifications:

Model: 3012
Inner Diameter (membrane): 3"
Inner Length (membrane): 12"
Feed Connection: 3/8" FNPT
Permeate Connection: 3/8" FNPT
Concentrate Connection: 3/8" FNPT
Maximum Operating Pressure: 90 psi
Minimum Operating Temperature: 35F
Maximum Operating Temperature: 125F

Shipping Dimensions:  13" x 4.5"; 1.5 lb